Corsair Unveils 32 GB Vengeance LPX DDR4 DIMMs, 64 GB & 128 GB Dual-Channel Kits

Corsair has introduced its first 32 GB unbuffered DRAM modules along with 64 GB and 128 GB dual-channel memory kits for mainstream PC platforms based on AMD’s 400/500-series as well as Intel’s 300-series chipsets (and their successors). Besides, the company also unveiled its 256GB eight-channel kit for high-end desktop as well as extreme workstation processors.

Corsair’s Vengeance LPX DDR4 unbuffered memory modules are based on 16 Gb memory chips (from an unconfirmed vendor, though Corsair historically relies on devices from Samsung) as well as the company’s custom 10-layer PCB designed to ensure quality signaling when operating at higher clocks. Traditionally for this product family, Corsair’s 32 GB Vengeance LPX UDIMMs are equipped with black anodized aluminum heat spreaders.

Set to be available in kits containing one, two, four, or eight 32 GB unbuffered DIMMs, Corsair’s Vengeance LPX modules are rated for DDR4-2400 CL16 16-16-39 at 1.2 V, DDR4-2666 CL16 18-18-35 at 1.2 V, and DDR4-3000 CL16 20-20-38 at 1.35 V modes. It is noteworthy that the modules come with SPD programmed for DDR4-2133 CL15 mode, but since they feature XMP 2.0 profiles, setting correct speeds should be easy.

Corsair Vengeance LPX DDR4 Kits Featuring 32 GB UDIMMs
Data rate Latency Kit Capacity Modules Voltage Heat Spreader Launch Price
2400 MT/s CL16
16-16-39		 32 GB 1 × 32 GB 1.2 V Black $149.99
64 GB 2 × 32 GB $299.99
128 GB 4 × 32 GB $599.99
256 GB 8 × 32 GB $1,199.99
2666 MT/s CL16 18-18-35 32 GB 1 × 32 GB 1.2 V $154.99
64 GB 2 × 32 GB $304.99
128 GB 4 × 32 GB $609.99
256 GB 8 × 32 GB ?
3000 MT/s CL16 20-20-38 32 GB 1 × 32 GB 1.35 V ?
64 GB 2 × 32 GB ?

Corsair’s 32 GB Vengeance LPX DDR4 unbuffered memory modules as well as kits on their base are available today directly from Corsair and will shortly be available from the company’s partners. One 32 GB DDR4-2400/DDR4-2666 module is priced at $149.99/$154.99; but dual, quad, and eight-channel kits are naturally more expensive.

Related Reading:

Source: Corsair

Comments

Post a Comment

Popular posts from this blog

Intel to Discontinue Itanium 9700 ‘Kittson’ Processor, the Last of the Itaniums

Image
Intel on Thursday notified its partners and customers that it would be discontinuing its Itanium 9700-series (codenamed Kittson) processors, the last Itanium chips on the market. Under their product discontinuance plan, Intel will cease shipments of Itanium CPUs in mid-2021, or a bit over two years from now. The impact to hardware vendors should be minimal – at this point HP Enterprise is the only company still buying the chips – but it nonetheless marks the end of an era for Intel and their interesting experiment into a non-x86 VLIW-style architecture. The current-generation octa and quad-core Itanium 9700-series processors were introduced by Intel in 2017, in the process becoming the final processors based on the IA-64 ISA. Kittson for its part was a clockspeed-enhanced version of the Itanium 9500-series ‘Poulson’ microarchitecture launched in 2012, and featured a 12 instructions per cycle issue width, 4-way Hyper-Threading, and multiple RAS capabilities not found on Xeon pr
Read more

Intel Axes 10nm CPU Based NUC

Image
Intel has notified its partners about plans to discontinue its only 10nm small form factor NUC in the market. The NUC, which went under the code name of Crimson Canyon, is/was Intel's only 10nm device in this market - it used Cannon Lake processors made on its 10 nm technology, and paired with AMD’s Radeon 540 graphics.  The fate of Intel’s Cannon Lake processors has been, to put it mildly, 'dead on arrival'. Delayed by over a year because of problems with 10 nm fabrication process, the CPUs suffered low yields and had design selections made that resulted in a non-functioning integrated GPU, as well as high power consumption: the Core i3-8121U processor at the heart of Intel's first generation 10nm ended up in a few China-only laptops ( which we reviewed ), and in a small number of Crimson Canyon NUC devices. Intel advises parties interested in its Crimson Canyon NUC SFF PCs to make their final orders by December 27, 2019, or return them by that date. The f
Read more

Qualcomm Launches the QCA6390 Chipset: 1.8 Gbps Wi-Fi 6 Ready with BlueTooth 5.1

Image
With the upcoming ratification of the Wi-Fi 6 (802.11ax) standard expected in August, a number of companies are gearing up with Wi-Fi 6 ‘ready’ routers and end-points to get the jump on the market. The idea is that the standard won’t change much between now and full ratification, and most companies developing chipsets expect to sail through without issues – the only difference between the companies will be on the ‘optional’ portions of the specifciations. With that, as we saw at Qualcomm’s Tech Day at the end of 2018, the company will be pushing its latest Wi-Fi 6 solutions onto the market. Today is the launch of one of the chipsets, the QCA6390, which also incorporates BlueTooth 5.1.
Read more