SilverStone Launches MS10: a 10 Gbps USB-C Adapter for SATA M.2 SSDs

As SATA SSDs slowly give way to M.2 SSDs, so too have the SSDs' use cases. Besides internal storage, of course, SATA SSDs have also commonly been used as both temporary and permanent external storage thanks to cheap SATA-to-USB adapters. And now that M.2 drives are rising in popularity, similiar adapters are popping up for SATA drives in the new form factor. The latest of these being SilverStone's recently launched MS10, a SATA M.2 SSD adapter that supports 10 Gbps USB transfer rates.

Comments

Post a Comment

Popular posts from this blog

Intel to Discontinue Itanium 9700 ‘Kittson’ Processor, the Last of the Itaniums

Image
Intel on Thursday notified its partners and customers that it would be discontinuing its Itanium 9700-series (codenamed Kittson) processors, the last Itanium chips on the market. Under their product discontinuance plan, Intel will cease shipments of Itanium CPUs in mid-2021, or a bit over two years from now. The impact to hardware vendors should be minimal – at this point HP Enterprise is the only company still buying the chips – but it nonetheless marks the end of an era for Intel and their interesting experiment into a non-x86 VLIW-style architecture. The current-generation octa and quad-core Itanium 9700-series processors were introduced by Intel in 2017, in the process becoming the final processors based on the IA-64 ISA. Kittson for its part was a clockspeed-enhanced version of the Itanium 9500-series ‘Poulson’ microarchitecture launched in 2012, and featured a 12 instructions per cycle issue width, 4-way Hyper-Threading, and multiple RAS capabiliti...
Read more

Intel Axes 10nm CPU Based NUC

Image
Intel has notified its partners about plans to discontinue its only 10nm small form factor NUC in the market. The NUC, which went under the code name of Crimson Canyon, is/was Intel's only 10nm device in this market - it used Cannon Lake processors made on its 10 nm technology, and paired with AMD’s Radeon 540 graphics.  The fate of Intel’s Cannon Lake processors has been, to put it mildly, 'dead on arrival'. Delayed by over a year because of problems with 10 nm fabrication process, the CPUs suffered low yields and had design selections made that resulted in a non-functioning integrated GPU, as well as high power consumption: the Core i3-8121U processor at the heart of Intel's first generation 10nm ended up in a few China-only laptops ( which we reviewed ), and in a small number of Crimson Canyon NUC devices. Intel advises parties interested in its Crimson Canyon NUC SFF PCs to make their final orders by December 27, 2019, or ...
Read more

CES 2019: ASRock's Five New B365 Motherboards

Image
ASRock unveiled five new B365 motherboards at CES 2019 with a mixture of features similar to its Z390 offerings. The B365 Pro4 and B365M Pro are targeted towards professional users while B365 and B365M Phantom Gaming 4 mark a lower cost entry point onto the Intel 8th and 9th generation processors. The last of the five new models is the mini-ITX sized B365M-ITX/ac. ASRock B365 Pro4 ATX Motherboard In an effort to free up some capacity for the fabrication of their 14 nm silicon,  Intel announced plans to add the B365 chipset  to their line up last month which uses their 22 nm manufacturing process. ASRock has taken this new chipset and marketed their new range with added the moniker of 'Power, Redefined', but the five new models look targeted more to general consumers.  Each of the five ASRock B365 models uses a single 8-pin 12 V ATX power connector to provide power to the CPU (which is ample given the B365 doesn't officially support overclocking)...
Read more