ZOTAC Unveils VR GO 2.0 Wearable PC: Core i7-8700T Meets GeForce GTX 1070

ZOTAC this week officially launched its second-generation VR GO wearable backpack PC for VR gaming. The new VR GO 2.0 system is somewhat smaller and marginally lighter than the one ZOTAC introduced back in 2016, though the only tangible performance upgrade versus the previous-gen backpack PC is Intel’s six-core processor.

The manufacturer announced plans to release its second-gen VR GO back at Computex, but did not disclose its exact specs. This week ZOTAC finally revealed that the new VR GO 2.0 system is outfitted with Intel’s six-core Core i7-8700T processor and paired with NVIDIA’s GeForce GTX 1070 GPU with 8 GB of GDDR5, 16 GB of DDR4 memory, and a 240 GB M.2 SSD with a PCIe 3.0 x4 interface. The system also has a 2.5-inch bay for another storage device so to provide plenty of capacity to install more games. Technically, the system can accommodate other CPUs and GPUs, but due to thermal concerns ZOTAC will offer its new backpack PC with the aforementioned hardware only (at least initially).

Just like its predecessor, the second-generation ZOTAC VR GO has a rich set of I/O capabilities that includes an HDMI 2.0 output as well as three USB Type-A ports on top to connect a VR headset as well as three additional USB 3.0 Type-A ports, a USB 3.0 Type-C header, two display outputs (one HDMI 2.0, one DP 1.3), an 802.11ac Wi-Fi + BT 5 module, one GbE port, an SD card reader, as well as two 3.5-mm audio jacks.

ZOTAC’s VR GO 2.0 is equipped with two hot-swappable batteries that can enable about 1.5 hours of gameplay (according to the manufacturer), which is a tad lower than in case of the the original VR GO. Just like before, the batteries can be hot-swapped and charged separately. In the meantime, the form-factor of the system allows it to be used like a desktop computer as it can be placed on a desk either vertically or horizontally and all the ports will remain accessible.

To make the system a bit more attractive to gamers and enthusiasts, the VR-GO 2.0 also has addressable RGB lighting on the back that can be used for customization.

ZOTAC has not officially disclosed pricing of the VR GO 2.0 wearable backpack PC so far, yet it is likely that it will cost around $2000, similar to the previous one. As for availability, the new system should hit the market sometime in late November or so, in time for holiday season in the U.S.

ZOTAC VR GO Comparison
  VR GO
ZBOX-VR7N70-W2B/W4B-BE/J/U/K		 VR GO 2.0
ZBOX-VR7N72-BE/J/U/K/AUS-W2C/W3C
CPU Intel Core i7-6700T
4 cores/8 threads
2.8 - 3.6 GHz
8 MB cache
35 W		 Intel Core i7-8700T
6 cores/12 threads
2.4 - 4 GHz
12 MB cache
35 W
PCH unknown 100-series unknown 300-series
Graphics NVIDIA GeForce GTX 1070
2048 stream processors
128 texture units
64 ROPs
256-bit memory interface
8 GB of GDDR5 8 GT/s memory		 NVIDIA GeForce GTX 1070
2048 stream processors
128 texture units
64 ROPs
256-bit memory interface
8 GB of GDDR5 8 GT/s memory
Memory Two SO-DIMM slots
16 GB DDR4-2133 installed
compatible with up to 32 GB of DDR4-2133		 Two SO-DIMM slots
16 GB DDR4 installed
compatible with up to 32 GB of DDR4
Storage 240 GB M.2/PCIe SSD
+ one extra 2.5"/SATA bay
+ SD card reader
Wi-Fi 802.11ac Wi-Fi + Bluetooth 4.2 802.11ac Wi-Fi + Bluetooth 5
Ethernet 2 × GbE ports (Realtek) 1 × GbE ports
Display Outputs 3 × HDMI 2.0
2 × DP 1.3		 2 × HDMI 2.0
1 × DP
Audio 3.5 mm audio in and 3.5 mm audio out
USB 6 × USB 3.0 Type-A (5 Gbps) 6 × USB 3.0 Type-A (5 Gbps)
1 × USB 3.0 Type-C (5 Gbps)
Other I/O DC12V-out for HTC Vive
Dimensions 410 mm × 270 mm × 76 mm
16.14 × 10.63 × 2.99 inches		 347.5 mm × 280.4 mm × 87.1 mm
13.68 × 11.04 × 3.43 inches
Weight 4.95 kilograms 4.7 kilograms
PSU External
Batteries 2 batteries, rated at 95Wh, 6600mAh two batteries
OS Windows 10 Home Windows 10 Pro
Price $1999.99 unknown

Related Reading:

ZOTAC Preps Second-Gen Wearable Backpack "VR GO" PC ZOTAC VR GO Backpack PC Gets Priced: Core i7-6700T, GeForce GTX 1070, $1999 ZOTAC Announces VR GO Backpack PC with GeForce GTX 1070 HP Expands Commercial VR Strategy: Z VR Backpack and Immersion Centers MSI Releases the 'VR One': A Backpack PC For VR From $1999

Comments

Post a Comment

Popular posts from this blog

Intel to Discontinue Itanium 9700 ‘Kittson’ Processor, the Last of the Itaniums

Image
Intel on Thursday notified its partners and customers that it would be discontinuing its Itanium 9700-series (codenamed Kittson) processors, the last Itanium chips on the market. Under their product discontinuance plan, Intel will cease shipments of Itanium CPUs in mid-2021, or a bit over two years from now. The impact to hardware vendors should be minimal – at this point HP Enterprise is the only company still buying the chips – but it nonetheless marks the end of an era for Intel and their interesting experiment into a non-x86 VLIW-style architecture. The current-generation octa and quad-core Itanium 9700-series processors were introduced by Intel in 2017, in the process becoming the final processors based on the IA-64 ISA. Kittson for its part was a clockspeed-enhanced version of the Itanium 9500-series ‘Poulson’ microarchitecture launched in 2012, and featured a 12 instructions per cycle issue width, 4-way Hyper-Threading, and multiple RAS capabilities not found on Xeon pr
Read more

Intel Axes 10nm CPU Based NUC

Image
Intel has notified its partners about plans to discontinue its only 10nm small form factor NUC in the market. The NUC, which went under the code name of Crimson Canyon, is/was Intel's only 10nm device in this market - it used Cannon Lake processors made on its 10 nm technology, and paired with AMD’s Radeon 540 graphics.  The fate of Intel’s Cannon Lake processors has been, to put it mildly, 'dead on arrival'. Delayed by over a year because of problems with 10 nm fabrication process, the CPUs suffered low yields and had design selections made that resulted in a non-functioning integrated GPU, as well as high power consumption: the Core i3-8121U processor at the heart of Intel's first generation 10nm ended up in a few China-only laptops ( which we reviewed ), and in a small number of Crimson Canyon NUC devices. Intel advises parties interested in its Crimson Canyon NUC SFF PCs to make their final orders by December 27, 2019, or return them by that date. The f
Read more

TeamGroup T-Force Xcalibur ARGB DDR4-4000 at Computex

Image
At Computex 2019, TeamGroup unveiled a couple of new products aimed at users looking for high-end components. One of these was its refreshed T-Force Xcalibur DDR4 memory now with addressable ARGB LEDs. During CES 2019, TeamGroup announced a set of ASRock Phantom Gaming branded Xcalibur RGB modules , fast forward to Computex 2019, TeamGroup had its new T-Force Xcalibur ARGB on display with the new ARGB heatsinks modelled over a high-end kit of DDR4-4000 Samsung B-Die based memory kit. The T-Force Xcalibur ARGB memory is very similar in design to the previous special edition Xcalibur RGB modules, but with new addressable RGB LEDs which seems to be the new market trend for gaming-focused brands. Each heatsink has a black aluminium finish with the Xcalibur and T-Force logos, with the 120 degrees angled lighting coming from the light bar at the top of the module which includes an Aztec inspired patterning. While TeamGroup only had a DDR4-4000 16 GB (2 x 8 GB) kit on displa
Read more