SK Hynix Develops First 16 Gb DDR5-5200 Memory Chip, Demos DDR5 RDIMM

SK Hynix on Thursday announced that it had completed development of its first DDR5 memory chip. The new chip offers a capacity of 16 Gb and is said to be the industry’s first DRAM that is fully compliant with the JEDEC standard, which is yet to be published. Meanwhile, mass production of SK Hynix's DDR5 memory chips is slated for 2020.

The new DDR5 chip from SK Hynix supports a 5200 MT/sec/pin data transfer rate, which is 60% faster than the 3200 MT/s rate officially supported by DDR4. Meanwhile the DRAM operates at 1.1 Volts, a 9% decrease in operating voltage. The monolithic 16 Gb chip is made using SK Hynix’s second generation 10 nm-class process technology (also known as 1Ynm), though the company does not disclose its die size and other peculiarities.

Looking forward, SK Hynix expects its DDR5 lineup to include DRAM chips at 8 Gb, 16 Gb, and 32 Gb capacities, with data transfer rates ranging from 3200 to 6400 MT/s.

Besides announcing the memory chip, SK Hynix also demonstrated the industry’s first DDR5 Registered DIMM. The DDR5-5200 RDIMM module offers a peak memory bandwidth of 41.6 GB/s, which is in line with DDR4 modules overclocked to their extremes (using LN2-cooled CPUs, etc.). The DDR5 RDIMM itself features 288 pins on a slightly curved edge connector (to reduce the insertion force on every pin), yet its layout and design are a bit different when compared to DDR4 to avoid insertion of DDR5 modules into DDR4 slots and vice versa.

SK Hynix said that it had already shipped DDR5 RDIMMs and UDIMMs to a “major chipset maker” (Intel?) to assist in the development of server and client platforms supporting the new type of memory.

SK Hynix intends to start mass production of DDR5 memory sometimes in 2020, when the aforementioned platforms (at least one of them) are expected to hit the market.

Overall, JEDEC expects DDR5 to bring in I/O speeds ranging from 4266 to 6400 MT/s, with a supply voltage drop to 1.1 V and an allowable fluctuation range of 3% (i.e., at ±0.033V). Along with the performance improvements, the new memory standard also stands to improve in total capacity and DIMM density, with chips planned for 16Gb and beyond.

Under the hood, the new standard will will also bring several major enhancements to the design of memory modules, with the goal of improving their real-world performance and enabling higher data transfer rates. For example, each DDR5 DIMM will feature two independent 32/40-bit channels (without/or with ECC). Furthermore, DDR5 will have a better command bus efficiency (as the channels will have their own 7-bit Address (Add)/Command (Cmd) buses), better refresh schemes, and an increased bank group for extra performance.

Last month Cadence said that enhanced functionality of the standard will enable DDR5 to offer a 36% higher real-world bandwidth vs. DDR4 at the same data transfer rate. While we will not be able to test this claim before 2020, the improvements of DDR5 compared to the predecessor certainly look impressive.

Related Reading:

Cadence & Micron DDR5 Update: 16 Gb Chips on Track for 2019 Cadence and Micron Demo DDR5-4400 IMC and Memory, Due in 2019 JEDEC: DDR5 to Double Bandwidth Over DDR4, NVDIMM-P Specification Due Next Year

Source: SK Hynix

Comments

Post a Comment

Popular posts from this blog

Intel to Discontinue Itanium 9700 ‘Kittson’ Processor, the Last of the Itaniums

Image
Intel on Thursday notified its partners and customers that it would be discontinuing its Itanium 9700-series (codenamed Kittson) processors, the last Itanium chips on the market. Under their product discontinuance plan, Intel will cease shipments of Itanium CPUs in mid-2021, or a bit over two years from now. The impact to hardware vendors should be minimal – at this point HP Enterprise is the only company still buying the chips – but it nonetheless marks the end of an era for Intel and their interesting experiment into a non-x86 VLIW-style architecture. The current-generation octa and quad-core Itanium 9700-series processors were introduced by Intel in 2017, in the process becoming the final processors based on the IA-64 ISA. Kittson for its part was a clockspeed-enhanced version of the Itanium 9500-series ‘Poulson’ microarchitecture launched in 2012, and featured a 12 instructions per cycle issue width, 4-way Hyper-Threading, and multiple RAS capabilities not found on Xeon pr
Read more

Intel Axes 10nm CPU Based NUC

Image
Intel has notified its partners about plans to discontinue its only 10nm small form factor NUC in the market. The NUC, which went under the code name of Crimson Canyon, is/was Intel's only 10nm device in this market - it used Cannon Lake processors made on its 10 nm technology, and paired with AMD’s Radeon 540 graphics.  The fate of Intel’s Cannon Lake processors has been, to put it mildly, 'dead on arrival'. Delayed by over a year because of problems with 10 nm fabrication process, the CPUs suffered low yields and had design selections made that resulted in a non-functioning integrated GPU, as well as high power consumption: the Core i3-8121U processor at the heart of Intel's first generation 10nm ended up in a few China-only laptops ( which we reviewed ), and in a small number of Crimson Canyon NUC devices. Intel advises parties interested in its Crimson Canyon NUC SFF PCs to make their final orders by December 27, 2019, or return them by that date. The f
Read more

TeamGroup T-Force Xcalibur ARGB DDR4-4000 at Computex

Image
At Computex 2019, TeamGroup unveiled a couple of new products aimed at users looking for high-end components. One of these was its refreshed T-Force Xcalibur DDR4 memory now with addressable ARGB LEDs. During CES 2019, TeamGroup announced a set of ASRock Phantom Gaming branded Xcalibur RGB modules , fast forward to Computex 2019, TeamGroup had its new T-Force Xcalibur ARGB on display with the new ARGB heatsinks modelled over a high-end kit of DDR4-4000 Samsung B-Die based memory kit. The T-Force Xcalibur ARGB memory is very similar in design to the previous special edition Xcalibur RGB modules, but with new addressable RGB LEDs which seems to be the new market trend for gaming-focused brands. Each heatsink has a black aluminium finish with the Xcalibur and T-Force logos, with the 120 degrees angled lighting coming from the light bar at the top of the module which includes an Aztec inspired patterning. While TeamGroup only had a DDR4-4000 16 GB (2 x 8 GB) kit on displa
Read more